Virgin Media Blocks Hub 4 Settings Over Security Concerns

A growing number of Virgin Media (O2) broadband users, particularly those still on the older Hub 4 (Arris TG3492LG-VMB) router, have found over the past few days that the router’s web-based admin page simply won’t load anymore (they get an “Unable to Connect” error instead), and it turns out this is no accident.

Locked Out of the Hub 4 Admin Page

Getting into a home router’s settings is a pretty basic need for a lot of people, and on the Hub 4 it usually means typing https://192.168.0.1 into a browser (or https://192.168.100.1 if the hub is in modem-only mode) and then logging in with the default details the provider supplied, which, it should be said, ought to be changed from the default anyway.

Lately the complaints have been piling up, the issue has surfaced on Reddit as well, and a few of the affected customers say VMO2’s own support staff seemed rather baffled by what was going on. Virgin Media has since confirmed that the block is deliberate, albeit temporary, and that it is there to shield users from a potential security hole. A spokesperson said there is no evidence of anything having been exploited within its systems, but that purely as a precaution the operator has switched off web access to the settings page on a small number of customers’ WiFi hubs until a patch is in place. The spokesperson added that WiFi connections aren’t affected, broadband carries on as normal, and people can still get at their settings by “other means”, with the patch to follow as soon as possible. Those “other means” most likely point to the Virgin Media Connect App for iOS and Android devices, which still lets Hub 4 owners control most of the router’s settings.

Which Flaw, and How Long?

Exactly which security problem Virgin Media is trying to head off is anyone’s guess at this point.

There has been some speculation that the hub’s interface could be running older PHP code, in which case the PHP2Shell exploit that has been all over the news lately would be a possible candidate. That remains unconfirmed, though, and Virgin Media wouldn’t say, when asked, whether the Hub 4 uses PHP at all. An update on 12th November added that several Virgin Media Business customers using the Hitron Chita router say they have hit the same restriction, and while the Chita and the Hub 4 are built on different hardware, it’s entirely possible they have a software weakness in common. As for timing, big broadband providers have a habit of taking their time to test, try out and gradually roll out firmware fixes for complicated problems (not least because third-party vendors are usually involved), so it could be a few weeks or more before normal access comes back. In the meantime some users have managed to get back in by pulling the coax cable out of the Hub 4 and giving it a full hardware reset with the pinhole button, which might be handy if a particular setting needs changing, though the block will probably return once the coax is plugged back in and the hub resets.

FAQ

Which routers are affected?

The Hub 4 (Arris TG3492LG-VMB) on home broadband, plus the Hitron Chita for some Virgin Media Business customers, with Virgin Media putting it at a small proportion of hubs.

Is broadband or WiFi affected?

No, according to Virgin Media, which says WiFi keeps working and broadband can be used as normal.

How can settings be changed in the meantime?

Through the Virgin Media Connect App on iOS or Android, which still covers most Hub 4 settings.

Subscribe to our weekly news digest.

Join now and become a part of our fast-growing community.

Invalid Email Address
Thanks for Subscribing!
We'll be sending you our best soon!
Something went wrong, please try again later